SMALL ROUND or POINTED Plain or Coloured
LARGE ROUND or POINTED Plain or Coloured
This kit consists of a Model Mate, a Right Angle Fence, a Surface Protector Mat and four clamps.
The base board is marked with scale feet and metres, actual inches and mm and
a grid pattern of 1 scale ft in each of the scales. Scales available are O (1/4"
and 7mm), S, 4mm, HO and N. Other scales are available by request.
The photo above shows a Model Mate Construction Kit in use using the acrylic fence, the
surface protector mat and clamps - all included in the kit. The photo below shows the
acrylic fence. See
Mate Product Range for details of boards and accessories.
A large range of brass wire, strips and special shapes are available.
Brass wire is 300mm long and sizes range from 0.25mm to 1.6mm diameter.
Brass angle, Tee section, channel, strips or flats and tube are available in various sizes all either 250mm or 300mm long. See Brass Wire & Shapes for details.
A laser cut NBB coach body is now available. The body is made from marine ply with some styrene components. The photo is of a completed coach incorporating bogies from Ian Lindsay Models, wheels from Steam Era, a scratch built frame, running board, handrails, seats, etc. Transfers, underframe, seats and door handles will be available soon. The NBB kit is available from Brunel Hobbies. See Custom Laser Cutting below for a photo of the coach body kit itself.
For those who have purchased the kit assembly instructions are now available online - these have been updated on 13 April 08. (size 3.15MB).
We have a large supply of copper clad strips available once again. See Copperclad Strips for details and pricing.
These combine a track alignment jig with a layout template!
Each of the templates are designed to clip together end to end to enable more complex curves to be produced and to use them as a track template guide.
They are designed to enable the track to be pinned into position and the Aligner removed leaving the track in position.
See Track Aligners for radii available and instructions on use.
This cradle will hold your locomotive, coach or other rolling stock securely to enable you to service, repair, detail or decal! It is a complete maintenance and service station for your rolling stock.
The locomotive shown in the cradle is the new PowerlineT class now available from Brunel Hobbies.
See Modeller's Cradle for details.
Brunel Models provide a custom laser cutting service in acrylic, styrene, wood and card. The coach above is a Puffing Billy NBB coach in 1/4"/ft constructed from laser cut marine ply and some styrene components with a 0.4mm marine ply roof. This coach body is available in kit form for $66.
We specialise in the production of custom Waterslide Transfers/Decals
from original artwork, photos and/or drawings supplied by the modeller.
There is also an increasing number of transfers/decals available for all
scales and prototypes including railways, trams and tractors.
See Decals/Transfers for details of pricing and how to draw your transfers or decals.
Brunel Models products, with the exception of the NBB, are available at hobby shops Australia wide and are distributed by AMRI, Queensland. All retailer enquires should be directed to AMRI.
Brunel Models products are available at Brunel Hobbies (Shop 5/16 Station Rd, Cheltenham, 3192).
See Brunel Hobbies web site for details of the shop opening days and times and their extensive range of stock.
These are a range of products to help the modeller keep track of tools, tidy up the workbench and mix paints. See Mate Product Range for details and pricing.